SEKURE Paradox Spectra 1686H Manuale di Installazione Scaricare il pdf (Pagina 51)

SPECTRA SERIES 49

12.7 FORCE ARMING

Force Arming allows users to rapidly arm the system, without having to wait for all zones in the system to be closed.

Force Arming is commonly used when a motion detector is protecting the area occupied by a keypad. Therefore,

when arming the system, if the motion detector is set as a Force Zone, the control panel will ignore the zone and

allow users to arm the system even if the zone is open. Any open Force Zones at the time of arming will be

considered deactivated by the control panel. If during this period a deactivated zone is closed, the control panel will

revert that zone to active status, hence, will generate an alarm if breached. UL Note: Not to be used with UL

installations

If you make a mistake, the keypad will emit a Rejection Beep. When correctly Force Armed, the appropriate arm

indication appears and the Exit Delay will initiate. Please note that Force Arming can also be activated using One-

Touch Force Armi ng. Also, note that the User Access Code must have the For ce Arming Option enabled.

12.8 MANUAL BYPASS PROGRAMMING

Manual Bypass Programming allows users to program the alarm system to ignore (deactivate) specified zones the

next time the system is armed. The Access Code must have the Bypass Programming Option enabled. Please note

that Fire Zones cannot be bypassed. Manual Bypass Programming can also be activated using One-Touch Bypass

Programming.

12.8.1 BYPASS RECALL FEA TUR E

After disarming the system, the control panel will erase the bypass entries. By using the Bypass Recall

Feature, you can reinstate the previous bypass entries saved in memory. This eliminates the need to

manually program the bypass entries every time you arm the system. The Access Code must have the

Bypass Programming Option enabled.

12.9 ONE-TOUCH ARMING

On e- Tou ch Arming allows users to arm the system without using an access code. Simply press and hold a key. One-

Touch Arming can be used to allow specific individuals like service personnel (i.e. cleaners, maintenance) to arm the

system when leaving the protected area, without giving them access to any other alarm system operations.

How Do I Force Arm?

1) All zones in the desired partition (except Force Zones) must be closed.

2) Press the [FORCE] key

3) Key in a valid [ACCESS CODE]*

*IF YOU HAVE ACCESS TO BOTH PARTITIONS

Press the key corresponding to the partition you wish to Force Arm. To arm both partitions, pr ess the [1] key then

after the Confirmation Beep press the [2] key.

How do I Program Bypass Entries?

1) Press the [BYP] key.

2) Key in a valid [ACCESS CODE]*

3) Select one or more [ZONES] you wish to bypass

4) Once you have entered the desired bypass entries, press the [ENTER] key to accept these entries.

*IF YOU HAVE ACCESS TO BOTH PARTITIONS

Press the key corresponding to the desired partition.

How Do I Recall Bypass Entries?

1) Press the [BYP] key.

2) Key in your [ACCESS CODE]*

3) Press the [BYP] key. Previously bypassed zones will illuminate.

4) Press the [ENTER] key.

*IF YOU HAVE ACCESS TO BOTH PARTITIONS

Press the key corresponding to the desired partition.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 59 60

Commenti su questo manuale

Nessun commento

SEKURE Paradox Spectra 1686H Manuale di Installazione Pagina 51

Commenti su questo manuale